AquaSensQ Logo
AquaSensQ
Smart Free Residual Chlorine Screening
Demo Mode / Standby
person
science
Simulated Result • Demo Data

Experimental screening estimation — not validated as regulatory proof of potable safety.

Sample Identifier SMP-2026-0518 Tap Water • Municipal, Ward 7
Timestamp 12 May 2026 11:20 AM EST
water_drop Estimated Free Residual Chlorine
0.42 mg/L Cl₂
check_circle Within Target Range (0.20 – 0.50 mg/L)

Derived from TMB optical chromogenic kinetic absorbance via ESP32-CAM module.

0.0 mg/L (Low) Target: 0.20 - 0.50 mg/L 1.0+ mg/L (High)
0.42
0.00 0.20 0.50 1.00+
info

Analysis Interpretation

The estimated free residual chlorine level of 0.42 mg/L conforms to standard municipal distribution benchmarks (0.20 to 0.50 mg/L), indicating adequate disinfection barrier against biological re-contamination.

verified_user Notice: Field screening estimates provide rapid directional feedback. For official regulatory audit reporting, proceed with standard DPD-1 colorimetric laboratory verification.
center_focus_strong

Optical Strip Diagnostics

OV2640 Active
ENCLOSURE: OPTICAL_CELL_A Exposure Calibrated
TMB Reaction ΔE: 14.82 • 0.42 mg/L
Z1
Ref Gray Neutral 18% Z2
Color Shift: CIE L*a*b* Standardized Illumination: 5500K LED
Source Classification Tap / Potable Main
Diagnostic Sensor ESP32-CAM (OV2640)
Optics & Light 5500K Diffused Matrix
Engine / Model OpenCV Chromaticity v1.4
Device Firmware v2.4.1-build89

Detection limit: 0.10 mg/L lower threshold. Reaction stabilized at 60-second read interval.